EIGRP
Questions 24
Answer 27
Views 80479
Do you have any Question?
Recommended
EIGRP Feed
eigrp is advance distance router protocol , where as rip is distance vector
eigrp can use bandwidth , delay ,...
Master Trainer,
Dual CCIE #42145 (R&S, Security), CCSI #34989 and Data Center Written
Diff...
,
CCNA Routing and Switching
CCNA Routing and Switching
When Query and Reply is generated?
If the topology table has only one successor and when the best path (successor ...
Initially EIGRP is Cisco Proprietary protcol but back in 2013 cisco made EIGRP as a open standard protocol which ca...
,
CCNA Routing and Switching
CCNA Routing and Switching
As of use both wildcard mask and subnet masks are same but
- when we are calculating subnet mask we make net...
,
CCNA Routing and Switching
CCNA Routing and Switching
The Topology Table is populated by the protocol dependent modules and acted upon by the DUAL finite state machine. ...
,
An IT Geek
An IT Geek
EIGRP Practical :
To verify Interfaces on which eigrp is enabled :
show ip eigrp interfaces
To verify neig...
,
CCNA Routing and Switching
CCNA Routing and Switching
EIGRP stands for Enhanced Interior Gateway Routing Protocol. It is used to share routing information in enterprise ...
.jpg)
t permits spoke-to-spoke route advertisement using neighbor command. That's it.
Let's look at this simple ...
RIP is a distance vector routing protocol. which was developed to provide routing in enterprise networks. RIP is c...
We can’t compare routing protocols like this. Both protocols are different and their behavior is totally diff...
R1(config)# router eigrp 1(autonomous system number) -- it will enable eigrp process on a router
...
,
CCNA Routing and Switching
CCNA Routing and Switching