topic
VLAN

  • Questions 12
  • Answer 14
  • Views 12825
Do you have any Question?
VLAN Feed
if you want to communicate vlan 100 to vlan 50 than you will have to configure the router on stick method    C...
author
,
CCNA Security
Vlan ( Virtual Local Area Network ) : Vlan is used to divide broadcast domain through configuration ( means boradca...
author
,
CCNA Routing and Switching
Lets say you want user with address 192.168.100.1 should not access any server(http) in same vlan 100. Switch(confi...
author


Master Trainer,
Dual CCIE #50204 (R&S,Security)
A switch has a single-broadcast domain. So, VLAN is basically used to overcome switch to broadcast is information...
author
Yes , VTP V3 can advertise extended VLan's
author
,
CCNA Routing and Switching
Dear Yogesh, In case of ISL Encapsulation all traffic is tagged. All control plane traffic is also tagged because ...
author
A virtual local area network (VLAN) is a logical group of workstations, servers and network devices that appear to ...
author
Cisco Switch L2 VLAN Go to configuration mode - run command vlan 10 then exit For L3 VLAN In Global Config Mode...
author


Master Trainer,
Dual CCIE #50204 (R&S,Security)
Reasons for latency Transmission mediums such as WAN or fiber optic cables all have limitations.Propagation is t...
author


Master Trainer,
Dual CCIE #50204 (R&S,Security)
In case of dot1q encapsulation, if you will change default VLAN from 1 to 10 then control plane traffic will go via...
author
Hi Nilay  your Pc will get ip address in this case because backup router is connected to the dhcp server . In FHR...
author