Hi Aaradhana  You will have to run command for neighbor R3 , not for R6 on  R4 . Because r4 is advertising routes to R3 of R6 . So , you have to run following command on R4 to modify next-hop --...

Hi  Aaradhana  Can you please send the database table of R2 and R3 . It can help more to understand that  what will be the problem .  Because , i have looked that on R2 you has configured virtua...

Hi please recheck the answer , I have modify this answer . Because it is not giving the option of a another answer .  If you were send the configuration of R1 or R2 that how you set the tag value...

  Hi As you mentioned here that packets are taking path from both R3 and R4 because of same metric . The reason here is that the whenever a cisco router forward traffic it will match the destinatio...

Hello Vishav Mehta ,  As you mentioned here that subnet is 12.1.1.0 and you want 2 valid ip address which you can assign to any machine . To perform this task , you have to use subnet mask of /...

Hello Aaradhana joshi ,  No , you don't have to remove all the interface setting configured in Task 2 , while performing Task 3 (A) . Because from R3 , you are sending individual routes and f...

Hello Debasish Roy  Port cost - It is the cost of a port which is calculated by bandwidth of link and inversely proportional to bandwidth of link . The following table describe the port cost value ...

Hi Everyone ,  In this case , you have to use concept of LEAK MAP . But in first you have to perform the following configuration on R3 and R4 - On R3 - You have to summarize all of the routes o...

Hello Keshav , Good Day. I would like to answer your quarries & thank you for your question. Based on router behavior, Router breaks the broadcast domain. Suppose a machine connected with Switch a...

A ROUTER CONFIGURED WITH THE "IP CLASSLESS "  COMMAND TRIES TO MATCH THE SPECIFIC SUBNET AND IGNORE THE CLASS ( A , B , C)  OF NETWORK AND ONLY USING DEFAULT ROUTE WHEN NO MATCH IS MADE .