4 days Technology Boot Camp

Enquire Now

+
Can't Read The Image? To Refresh

Visit Our Labs

All Courses

CISCO CCNA

CCNA

CISCO CCNP

CISCO CCIE

COMBO COURSES

MICROSOFT COURSES

MCSE Server Infrastructure

Career Kick Start Courses

Multi-Vendor Technology Expert ProgramCombo

CCIE ENTERPRISEINTEGRATED

CCIE SECURITY V6INTEGRATED

CCNA + CCNP ENTERPRISECOMBO

CCNA + CCNP ENTERPRISE + MCSE Server Infrastruture

CCIE Data CenterIntegrated

Testimonials

OVER 90% CCIE 1ST ATTEMPT SUCCESS RATE

CCNP(R&S)+CCIE(R&S) Written+Lab

South Africa

View More Testimonials

Why NB

WORLD'S LARGEST ITTRAINING LABS

24*7 LABFACILITY

NB INAWARDS

PHOTOGALLERY

9 AMAZING FACTS ABOUT NB

NB Facilities

CCIE R&S
4 days Technology Boot Camp

4 days CCIE R&S V5 Technology Boot Camp

Do you wish to see your CCIE dream turning into reality?

Do you want to see yourself with the proud CCIE number for which you have been waiting since last many years?

With Network Bulls' 4 days technology Boot Camp, you are going to gain complete knowledge of the technologies covered in the CCIE lab exam blueprint and used later in the real time working environment once you get your coveted CCIE number.

Our master trainer will take you through a roller-coaster ride of technology learning, which will allow you to reach the new heights in your career. The trainer will teach you how to make right strategy to take the lab, how to do the right configurations and which kind of questions you need to have understanding of, to get your CCIE number.

Note - This Boot Camp is very intense. CCIE lab technology Boot Camp is designed for people who have cleared their CCIE written exam and want to clear their CCIE lab exam in next 1-2 months. Candidates willing to attend this Boot Camp are expected to have good knowledge of concepts covered in the CCIE written exam blueprint. If you don't have knowledge up to this level, you might face difficulties in understanding the CCIE lab exam Boot Camp.

What is covered in this Boot Camp
and breakup of the days?

This 4 days Boot Camp is designed for CCIE candidates who possess sound knowledge of the technologies covered in the CCIE written exam blueprint, and have passed their CCIE Written Exam. Students willing to join this Boot Camp should have clear understanding on the v5 blueprint before they come for this course. Students who are planning to come for this Boot Camp can expect minimum 7 hours of continuous lecture and practical demonstrations per day, and then it will be followed by a series of technology-specific labs, which can run up to three to four hours every day.

Please note that this Boot Camp will focus on most important technologies which are used in production environment and in the CCIE lab exam, hence this Boot Camp will not cover each and every details of all the topics mentioned in the blueprint. Students should spend time doing self-study before coming for this class.

Trainer Profile

Our master trainer, Mr. Mohit Bhalla (Dual CCIE #42145 (R&S, Security), CCSI #34989 and Data Center Written) has more than 10 years of experience in training and has been guiding candidates for CCIE R&S lab exam preparation since last 5 years.

Day 1 Plan

The Instructor will start the session with the introduction of each student and will assess his or her strengths & weaknesses according to the information provided. This will help the trainer to focus more on the topics, which he thinks, should be focused more to address the technological weakness of the participating students. The day wise plan will also be discussed so that the students have a clear understanding of what the Boot Camp is going to deliver.

After the student and course introduction, the instructor will make sure that all students have access to their rack for the entire duration of the course. Then trainer will start covering all Layer 2 topics required for the CCIE Version 5 Lab exam.

Topics covered include:

Section 1.0 - Layer 2 Technologies

1.1 LAN Switching Technologies

1.1.a Implement and troubleshoot switch administration
1.1.b Implement and troubleshoot layer 2 protocols
1.1.c Implement and troubleshoot VLAN
1.1.d Implement and troubleshoot trunking
1.1.e Implement and troubleshoot etherchannel
1.1.f Implement and troubleshoot spanning-tree
1.1.g Implement and troubleshoot other LAN switching technologies

1.2 Layer 2 Multicast

1.2.a Implement and troubleshoot IGMP

1.3 Layer 2 WAN circuit technologies

1.3.a Implement and troubleshoot HDLC
1.3.b Implement and troubleshoot PPP

Hands-on Lab Exercises

After trainer's lecture, students will need to take two separate Layer 2 labs that will focus on the topics covered during the lecture. The first lab will focus more on command line and ensure that students have the knowledge and skill to configure various Layer 2 technologies, such as spanning-tree modification, Ether channel configuration, VLAN change, VTP, etc. The second lab will be almost a replica of real CCIE lab and it will be a real test of your layer 2 skills. These lab tasks will be done on a complex topology, which will consist of more than 20 devices including Routers and Switches. Students who think they are ready to take the real lab should be able to complete this second lab within 1 hour.

Day 2 Plan

Students will start with Section 2.0 - Layer 3 Technologies. Trainer will cover layer3 topics such as EIGRP, OSPF, traffic filtering, summarization, IPv6, etc. These topics will be covered keeping the CCIE Lab Exam in mind. This section is the most important when it comes to CCIE lab exam. Students should have clear understanding of how these technologies work so that they can answer the queries raised by the trainer about how to solve a particular scenario during T-shoot.

Topics covered include:

Section 2.0 - Layer 3 Technologies

2.1 Addressing technologies

2.1.b Identify, implement, and troubleshoot IPv6 addressing and sub-netting

2.2 Layer 2 Multicast

2.2.a Troubleshoot reverse path forwarding
2.2.b Implement and troubleshoot IPv4 protocol independent multicast

2.3 Fundamental Routing Concepts

2.3.d Implement, optimize and troubleshoot administrative distance
2.3.e Implement and troubleshoot passive interface
2.3.f Implement and troubleshoot VRF lite
2.3.g Implement, optimize and troubleshoot filtering with any routing protocol
2.3.h Implement, optimize and troubleshoot redistribution between any routing protocol
2.3.i Implement, optimize and troubleshoot manual and auto summarization with any routing protocol
2.3.j Implement, optimize and troubleshoot policy-based routing
2.3.n Implement and troubleshoot routing protocol authentication

2.5 EIGRP (for IPv4 and IPv6)

2.5.a Describe packet types
2.5.b Implement and troubleshoot neighbor relationship
2.5.c Implement and Troubleshoot Loop free path selection
2.5.d Implement and troubleshoot operations
2.5.e Implement and troubleshoot EIGRP
2.5.f Implement and troubleshoot load-balancing
2.5.g Implement EIGRP (multi-address) named mode

2.6 OSPF (v2 and v3)

2.6.a Describe packet types
2.6.b Implement and troubleshoot neighbor relationship
2.6.c Implement and troubleshoot OSPFv3 address-family support
2.6.d Implement and troubleshoot network types, area types and router types
2.6.e Implement and troubleshoot path preference

Hands-on Lab Exercises

After the lecture, students will be given labs which will focus on EIGRP and OSPF configurations. These labs are designed to give more understanding of OSPF and EIGRP operations, including path selection and redistribution, etc. as well as advanced traffic filtering. Students should be able to finish these labs in 2-3 hours time frame.

Day 3 Plan

Day 3 will cover very important topics from CCIE lab exam point of view. Morning will start with BGP protocol, which will cover different BGP features and configurations as well as discussions about what kind of questions, which might appear in the lab exam. We will start with VPNs in the second half, which will include MPBGP configurations and concepts, and then will cover the important topics MPLS and L3VPN. Earlier discussed technologies such as VRF lite, EIGRP, and OSPF will be reviewed from the PE-CE configuration perspective.

Topics covered include:

Section 2.0 - Layer 3 Technologies

2.7 BGP

2.7.a Describe, implement and troubleshoot peer relationships
2.7.b Implement and troubleshoot IBGP and EBGP
2.7.c Explain attributes and best-path selection
2.7.d Implement, optimize and troubleshoot routing policies
2.7.e Implement and troubleshoot scalability
2.7.f Implement and troubleshoot multi-protocol BGP
2.7.g Implement and troubleshoot AS path manipulations
2.7.h Implement and Troubleshoot Other Features

Section 3.0 - VPN Technologies

3.1 Tunneling

3.1.a Implement and troubleshoot MPLS operations
3.1.b Implement and troubleshoot basic MPLS L3VPN

Hands-on Lab Exercises

After the lecture and demonstration students will be take and complete different labs configuring BGP and L3VPN. These labs will ensure that students have a good understanding about how to configure iBGP and eBGP, as well as configuration of MPLS and L3VPN, because these technologies will be important from every CCIE R&S exam point of view.

Day 4 Plan

Day 4 will start with DMVPN, which is again a very important topic. The instructor will explain all 3 phases of DMVPN. Once the foundational pieces are understood, and then the instructor will combine routing protocols such as EIGRP and OSPF, with DMVPN so students can understand how these routing protocols are used in combination with DMVPN. Instructor will start with Infrastructure Services in the second half of the lecture where focus will be mainly on technologies like HSRP, NAT, SNMP, DHCP etc.

Topics covered include:

Section 3.0 - VPN Technologies

3.1 Tunneling

3.1.c Implement and troubleshoot encapsulation
3.1.d Implement and troubleshoot DMVPN (single hub)

3.2 Encryption

3.2.a Implement and troubleshoot IPsec with preshared key

5.3 Network Services

5.3.a Implement and troubleshoot first-hop redundancy protocols
5.3.b Implement and troubleshoot network time protocol
5.3.c Implement and troubleshoot IPv4 and IPv6 DHCP
5.3.d Implement and troubleshoot IPv4 network address

Section 4.0 - Infrastructure Security

4.1 Device security

4.1.a Implement and troubleshoot IOS AAA using local database
4.1.b Implement and troubleshoot control plane policing

4.2 Network security

4.2.a Implement and troubleshoot switch security features
4.2.b Implement and troubleshoot router security features

Section 5.0 - Infrastructure Services

5.1 System Management

5.1.a Implement and troubleshoot device management
5.1.c Implement and troubleshoot logging

Hands-on Lab Exercises

This will be the last and final hands-on lab of the Boot Camp. Students will configure the technologies covered throughout the day. Upon completing this final lab, students should have a good understanding about the requirement of skills needed to crack the CCIE lab exam.

This concludes the 4 days extensive Boot Camp of CCIE R&S. attending this Boot Camp, Every student should possess in depth knowledge which is needed to understand the lab exam pattern and pass the CCIE lab exam later on.

What is included in this Boot Camp (lab access etc)

Apart from the dedicated rack access that you will be given for the entire duration of CCIE Lab Boot Camp, you will also get the complimentary rack access for additional 30 days for 12 Hours a Day.

To resolve after Boot Camp queries you will get the trainer's support for the next 60 days.

CCIE Lab workbook with mock labs to make sure that you practice as much as needed in order to be ready to take CCIE lab exam.

Training Schedule

30th Jan 2018 - 2nd Feb 2018

4 days R&S Tech. Boot Camp

$ 1500

Add to cart

Add-ons for Early Birds Register before 3 months of the scheduled Boot Camp and avail 2 days of Nexus Boot Camp absolutely free. Registration fee is 1000 USD which is part of the training fee.

Let Our Student's Speak